A replica Omega 5710 is a copy of a 1960s Omega case reference, built with a slim steel case and a plain three-hand dial. A good version matches the original's case width, lug spacing, crown position, and dial printing, and it runs on a mechanical movement rather than a throwaway quartz module. Prices for these replicas sit between $130 and $450, depending on the movement inside and the finish on the case.
What Is the Omega 5710 Reference?
5710 is a case reference number that Omega used in the mid 1960s. It points to a case shape and size, not to a fixed dial or movement, so two watches that share the number can look nothing alike.
Surviving examples are almost all stainless steel, and case widths land in the 34 to 36 mm range. Lug spacing on watches from this generation runs 18 mm most often, with a few cases at 20 mm.
Omega reused numbers across markets and years. No single spec sheet covers every 5710, so compare the replica against photos of the exact watch you want.
Why Buyers Look for a Replica Omega 5710
The original is a vintage piece with a thin supply. Clean examples sell for four figures, and a service from a watchmaker can cost as much as a working watch.
A replica delivers the same profile on the wrist for a fraction of that outlay, and you can wear it without worry about a 60-year-old gasket.
Common reasons buyers pick one:
- Vintage look at a modern price
- Low risk if the watch is lost or damaged
- Access to dial and strap options the original never offered
- Replacement movements and straps that stay available
Which Movement Should You Choose?
The movement decides the price, the feel, and how long the watch lasts. Three options cover almost every listing.
Quartz
Quartz builds are the cheapest, often $130 to $180. They keep time well and need a battery every year or two. The giveaway is a ticking seconds hand and a thinner case than the original.
Automatic
Automatic clones use a Miyota 8215, a Seiko NH35, or a decorated Chinese caliber, and they run $200 to $320. The seconds hand sweeps, the case carries more weight, and the watch sits closer to the original on the wrist. Power reserve on these movements lands near 40 hours.
Hand-Wound
A handful of sellers offer hand-wound movements to match the originals. These are harder to find in replica catalogs and cost more than an automatic.
Case, Dial, and Bracelet Details That Matter
- Case width and height: 34 to 36 mm wide, under 11 mm thick for a period-correct profile
- Lug spacing: confirm 18 mm or 20 mm, since straps and bracelets are not interchangeable
- Crystal: domed acrylic on vintage-accurate builds, sapphire on modern versions
- Dial printing: check the font, the spacing, and where the brand name sits under 12 o'clock
- Date window: correct only if the original model had one
- Case back: plain, or stamped with a logo and reference number
- Strap or bracelet: a leather strap for dress wear, a fine-link steel bracelet for a 1960s sport look
What Does a Replica Omega 5710 Cost?
Asking prices cluster into three bands. Shipping and extras push the total higher.
- Entry quartz: $130 to $180
- Mid-range automatic: $200 to $320
- Top clone with a decorated movement: $350 to $450
- Add-ons: sapphire crystal, anti-reflective coating, or a branded clasp adds $30 to $80
Pre-Purchase Quality Check
- Ask for photos of the actual watch. Catalog renders hide flaws.
- Study the dial under bright light for crooked markers and blurry printing.
- Get the case diameter and lug spacing in writing.
- Ask which movement is inside and who makes it.
- Check the crown position and how it sits against the case.
- Request a timegrapher reading for any mechanical version.
- Confirm the return window and what it covers.
Red Flags in Cheap Listings
- No photos of the real watch, only manufacturer images
- Prices under $80 for an automatic
- No movement details in the listing
- Claims of Swiss parts on a watch that costs $200
- No return policy, or a policy that excludes defects
- Reviews that repeat the same phrasing across sellers
How to Care for a Replica Omega 5710
Treat it like any mechanical watch and it will last years. Water is the main threat on vintage-style cases.
- Assume 3 ATM water resistance unless the seller states more. Splashes are fine, swimming is not.
- Wind a hand-wound movement at the same time each day and stop when you feel resistance.
- Wipe the case and crystal with a soft cloth after wear.
- Keep the watch away from speakers, magnets, and phones.
- Replace a cheap automatic movement rather than paying for a service.
FAQ
Is the replica Omega 5710 water resistant?
Most listings rate 3 ATM, which covers rain and hand washing. Do not swim or shower with one unless the seller confirms a higher rating and a screw-down crown.
How do I spot a good replica Omega 5710?
Start with the dial, then the case. Sharp lugs, even brushing, and straight markers separate a $300 build from a $120 one.
Will a replica Omega 5710 hold its value?
No. Replicas are not investments and resale is limited. Buy one to wear.
How long does one last?
A quartz version runs five to ten years with battery changes. An automatic with a Miyota or Seiko movement can reach a decade with basic care.
Bottom Line
Pick the movement first, since it drives both the price and the feel on the wrist. Confirm case width and lug spacing in writing, then review real photos before you pay.